LABORATORY AGITATOR: VISCO JET® VJ150

LABORATORY AGITATOR: VISCO JET® VJ150

For Laboratory and Development

  • For vessel heights up to 400mm
  • Max. vessel diameter up to 400mm
  • Manual height adjustment, continuously lockable
  • Dorsal lifting device covered for best cleanability and safety
  • Agitator column in stainless steel
  • Drive with 0.25kW and frequency converter
  • Different VISCO JET® mixing elements for low, medium and high-viscosity media
  • Agitator shaft with convenient fast coupling device

*All illustrations are schematic representations, deviations and changes reserved.

Similar Posts

PILOT PLANT AGITATOR: VISCO JET® VJ200
|

PILOT PLANT AGITATOR: VISCO JET® VJ200

Byviscojetasia

For Research and Pilot Production Can be used up to a container height of 500mm Maximum container diameter of 400mm Manual lift adjustment, continuously lockable, safety switch. Different VISCO JET ® mixing elements for low, medium and high-viscosity media Various drive outputs available Upgrade options Also available with ATEX certification Container holder and base plate Individual control technology Agitator stand in stainless steel *All illustrations are schematic representations, deviations and changes reserved.

LABORATORY AGITATOR: VISCO JET® VJ100

LABORATORY AGITATOR: VISCO JET® VJ100

Byviscojetasia

For Research and Pilot Production High-torque drive with continuously variable speed control Timer can be set to limit the agitation duration Height-adjustable coated retort stand in H-form base Different VISCO JET ® mixing elements for low, medium and high viscosity mixture / media in plastic and stainless steel Drive fixed by an agitator damp on the guide column Suitable for beakers, stainless steel pots and vessels,…

LABORATORY MIXING ELEMENT SET: VISCO JET® VJ900

LABORATORY MIXING ELEMENT SET: VISCO JET® VJ900

Byviscojetasia

COMPLETE, VERSATILE, ROBUSTEverything at hand Aluminum laboratory case with foam padding, containing the following VISCO JET® mixing elements: VISCO JET®Cone,  d = 60 mm VISCO JET®Cone, d = 80 mm VISCO JET®Spiral, d = 80 mm VISCO JET®Spiral, d = 120 mm VISCO JET®Cone, ProJet colored: RED, d = 120 mm VISCO JET®Crack, d2 = 120 mm Agitator shaft d = 10 x 500 mm with M8 thread Special plastic in red RAL 3000 *All illustrations are schematic representations, deviations and changes reserved.