LABORATORY AGITATOR: VISCO JET® VJ100

For Research and Pilot Production

  • High-torque drive with continuously variable speed control
  • Timer can be set to limit the agitation duration
  • Height-adjustable coated retort stand in H-form base
  • Different VISCO JET ® mixing elements for low, medium and high viscosity mixture / media in plastic and stainless steel
  • Drive fixed by an agitator damp on the guide column
  • Suitable for beakers, stainless steel pots and vessels, reaction vessel, etc.
  • Only available in non-ATEX version

Upgrade options

  • Agitator shaft d = 10 mm, Lw = 500 mm with M8 threaded connector in stainless steel
  • VJ900 Impeller set – a comprehensive set of Visco Jet impellers so that you can have the correct impeller for the vessel size and the agitation mix task.

*All illustrations are schematic representations, deviations and changes reserved.

Similar Posts

LABORATORY AGITATOR: VISCO JET® VJ150

LABORATORY AGITATOR: VISCO JET® VJ150

Byviscojetasia

For Laboratory and Development For vessel heights up to 400mm Max. vessel diameter up to 400mm Manual height adjustment, continuously lockable Dorsal lifting device covered for best cleanability and safety Agitator column in stainless steel Drive with 0.25kW and frequency converter Different VISCO JET® mixing elements for low, medium and high-viscosity media Agitator shaft with…

PILOT PLANT AGITATOR: VISCO JET® VJ200
|

PILOT PLANT AGITATOR: VISCO JET® VJ200

Byviscojetasia

For Research and Pilot Production Can be used up to a container height of 500mm Maximum container diameter of 400mm Manual lift adjustment, continuously lockable, safety switch. Different VISCO JET ® mixing elements for low, medium and high-viscosity media Various drive outputs available Upgrade options Also available with ATEX certification Container holder and base plate Individual control technology Agitator stand in stainless steel *All illustrations are schematic representations, deviations and changes reserved.

LABORATORY MIXING ELEMENT SET: VISCO JET® VJ900

LABORATORY MIXING ELEMENT SET: VISCO JET® VJ900

Byviscojetasia

COMPLETE, VERSATILE, ROBUSTEverything at hand Aluminum laboratory case with foam padding, containing the following VISCO JET® mixing elements: VISCO JET®Cone,  d = 60 mm VISCO JET®Cone, d = 80 mm VISCO JET®Spiral, d = 80 mm VISCO JET®Spiral, d = 120 mm VISCO JET®Cone, ProJet colored: RED, d = 120 mm VISCO JET®Crack, d2 = 120 mm Agitator shaft d = 10 x 500 mm with M8 thread Special plastic in red RAL 3000 *All illustrations are schematic representations, deviations and changes reserved.